High Temperature Polycarbonate-ABS Alloy Natural-1.75 mm High temperature so it prints easily and

so it prints easily and can be heat treated for higher temperature performance with a potential Heat Deflection Temperature (HDT) in excess of 140C (285F) depending on processing

Layer lines disappear with the beautiful matte black finish

If MODIFI3D is not used for 25 seconds it will go into sleep mode (light will go out and the tip will start to cool)

HTPLA out performs PLA

in one print

High Temperature Polycarbonate-ABS Alloy Natural-1.75 mm High temperature so it prints easily andProto pasta Polycarbonate ABS Alloy is an tough material designed for strong, resilient parts. Properties are excellent and greatly improved over standard ABS. Processing is challenging. For best results, a heated bed is required to control warpage and improve layer adhesion. Cross sectional area should be minimized. 1. 75 mm 500g is on a 8" diameter spool PC ABS is moisture sensitive. Even when stored in a bag with desiccant, drying in an oven for ~