5.5" Double Groove A Section 4L Sheave with 1-1/4" (1.250") H-Style Split Taper Bushing - 2AK56H 1/4" NPT • Maximum of 220 Standard

• Maximum of 220 Standard Cubic Feet Per Minute At 100 Pounds Per Square Inch

Brass internals & connection (w/ built in snubber)

This pump is most commonly used on compressors under 60 gallons in size and can be used with a true 5 horsepower motor (these motors typically run at 20-23 amps on 230 volts)

• Approximate Dimensions (W x H x D): 4-1/2" x 8-7/8" x 4-3/8"

) - 3/4" Male NPT (Note: 3/4" NPT Measures About 1" In Diameter)

5.5" Double Groove A Section 4L Sheave with 1-1/4" (1.250") H-Style Split Taper Bushing - 2AK56H 1/4" NPT • Maximum of 220 StandardCast Iron 5. 5" Dual Groove Belt A Section 4L Pulley w 1 1 4" Sheave Bushing Masterdrive dual groove 5. 5" cast iron pulley sheave with 1 1 4" H bushing for A section belt is a high quality 2 piece pulley that measures 5. 5" outside diameter and is designed to be used with an H style bushing. This bushing inserts into the center of the pulley and slides over the shaft, as you tighten down the bolts on the H bushing it will tighten down on the shaft.