Body- Armguard G17 Size of Chassis:37" To be welded onto the

To be welded onto the frame as a replacement if necessary

Snap ring at the top as a stop for the quick release spline and two-hole locations in the bottom ears

Four 1/8" by 5/8 id spindle spacers and an 18pc

Providing you with a variety of gears for the more common gear ratios

This is a common set of Douglas polished wheels for most divisions

Body- Armguard G17 Size of Chassis:37" To be welded onto theThis aluminum panel is only available in white. Some fitting is required. Use a stepped unibit to drill dzus buttonholes and tin snips to remove any excess material. Use clamps to hold panel in place on chassis. Then with a pencil or pen mark the dzus holes on the inside of the panel.