PressFit30 x 83mm - Wide Format (XL) 30mm MTB Spindle BB95 Attention: If you have the

Attention: If you have the newer FACT/Sworks crank set that features a 1-piece spindle you will need our crank spindle spacers to replace the triple grub screw device that comes stock

THE CERAMITECH ADVANTAGE:

Dual polymer bearing shields seal out dirt and debris while isolating the steel crank spindle from the steel bearing races to eliminate a major source of creaking

Our 30mm spindle optimized design is set to the widest stance the crank set allows while ensuring that interfaces between crank arm splines and spindle splines have maximum engagement and Q-factor is set as narrow as possible

road or MTB

PressFit30 x 83mm - Wide Format (XL) 30mm MTB Spindle BB95 Attention: If you have theInfo Installation Instructions Video Specifications Spacers JUST THE FACTS: The BBInfinite PressFit30 83 MTB works with all Wide Format 30mm spindle MTB cranksets on the market, such as the BB392Evo crankset, RaceFace NextR Cinch SL, and SRAM wide format cranks, just to name a few. Our PF30 XL 83 is also compatible with DUB cranks with a simple hardware swap just in case you need to make a change down the road. The PF30 83 XL WILL NOT FIT Cannondale