Pay in 4 interest-free payments of $3.50 Learn more
Ships within 48 hours · Estimated delivery Aug 13 - Aug 18
8 built-in exhaust temperature (type-k) amplifiers (requires secondary cable harness) - RACE Version only
Liquid temperature sensor - 1/8 NPT thread
This is accomplished with a highly efficient filter element
3m cable length
and 100% capture efficiency at 35 microns
Connector 12-way Molex 120G housing (PWM idle stepper module) PNP 8 built-in exhaust temperature (type-k)The connector required used for the MaxxECU PWM 2 Stepper Idle Module Don't forget: PWM 2 Stepper Idle Module Pinout: Pin 1 = Coil 1 Positive Pin 2 = Coil 1 Negative Pin 3 = Coil 2 Positive Pin 4 = Coil 2 Negative Pin 5 = PWM Input Pin 7 = +12V (from ignition key) Pin 12 = GND
US$ 58850.00
US$ 340.12
US$ 261.31
US$ 199.00
US$ 200.89
US$ 22.99
US$ 365.88
