180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (40.0 mm OD, 152.4 mm CLR) NPS 3/8 At anytime during the design

At anytime during the design in PRO's assembly interface you can lookup the details of a part and print out entire manufacturing instructions

Backing Block Pin

As mentioned previously

We recommend going up one wall thickness when bending these types of tubing for best results

Outside Diameter of the Tubing (OD):1-5/8" (41

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (40.0 mm OD, 152.4 mm CLR) NPS 3/8 At anytime during the designSpecs Outside Diameter of the Tubing (OD): 40. 0 mm Minimum Wall Thickness (DOM): 0. 083" (2. 1 mm) Minimum Wall Thickness (4130): 0. 083" (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095" (2. 4 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 180, after springback Maximum Ovality: <10%,