90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (20.0 mm OD, 88.9 mm CLR) 0.083" At anytime during the design

At anytime during the design in PRO's assembly interface you can lookup the details of a part and print out entire manufacturing instructions

Outside Diameter of Pipe: 2

Outside Diameter of the Tubing (OD): 50

EZ3D is also our introduction to Bend-Tech's simulation

Includes: 1-1/4" Dimple Die | Requires 1-1/4" Pilot Hole

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (20.0 mm OD, 88.9 mm CLR) 0.083" At anytime during the designSpecs Outside Diameter of the Tubing (OD): 20. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: