Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (28 mm OD, 114.3 mm CLR) 1-1/4" Minimum Inside Radius: Approximately 12”

Minimum Inside Radius: Approximately 12” (304

This die fits the 105 Brute Tube and Pipe Bender for bending 1-1/8" OD round tubing at a 3" centerline radius with a maximum degree of bend of 90 degrees after springback

Decreases time spent on production jobs

This roll set will bend the following sizes of material: 1-1/4" x 1-1/4" Square

outside and inside dimensions

Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (28 mm OD, 114.3 mm CLR) 1-1/4" Minimum Inside Radius: Approximately 12”Specs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2 (114. 3 mm) Maximum Degree of