90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 0.134" Outside Diameter of the Tubing

Outside Diameter of the Tubing (OD): 14

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Minimum Wall Thickness (Aluminum): Contact for Details

Decreases time spent on production jobs

This roll set will bend the following sizes of material: 1/2" x 1/2" Square

90 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (38.0 mm OD, 177.8 mm CLR) 0.134" Outside Diameter of the TubingSpecs Outside Diameter of the Tubing (OD): 38. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: