180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) 2-1/4" OD Focus on Manufacturability:

Focus on Manufacturability:

1" 4140 Shaft rides in 2 double-sealed ball bearings (no needle bearings or bushings

Please call our tech department at +1 (813) 986-9000 to order

" page (located under the Resources tab) is a useful tool if you're not sure what the difference between tube and pipe is

In the graphic below you can watch the part being created as the values are entered in

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) 2-1/4" OD Focus on Manufacturability:Specs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109" (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3" (76. 2 mm) Maximum Degree of