90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (40.0 mm OD, 177.8 mm CLR) 3" CLR 1-1/2" x 2" Rectangular -

1-1/2" x 2" Rectangular - Hardway

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

0-50 degrees (over 2 1/2")

3/4" (w) x 3/8" (leg) Channel Stock - Easyway

Arbor Thread Sizes: 1/2-20 and 5/8-18 (both are on the shaft)

90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (40.0 mm OD, 177.8 mm CLR) 3" CLR 1-1/2" x 2" Rectangular -Specs Outside Diameter of the Tubing (OD): 40. 0 mm Minimum Wall Thickness (DOM): 0. 065 (1. 7 mm) Minimum Wall Thickness (4130): 0. 065 (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083 (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7 (177. 8 mm) Maximum Degree of Bend: