Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD, 4" CLR) 90 Degrees Outside Diameter of the Tubing

Outside Diameter of the Tubing (OD): 1/2" (12

Flat Stock

ERW (HREW or CREW) has thin spots which may cause a bending problem

Minimum Wall Thickness: Depends on Die (See Die Charts)

134" tubing or NPS 1-1/2 pipe with no effort

Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD, 4" CLR) 90 Degrees Outside Diameter of the TubingSpecs Outside Diameter of the Tubing (OD): 1 1 8" (28. 6 mm) Minimum Wall Thickness (DOM): 0. 065 (1. 7 mm) Minimum Wall Thickness (4130): 0. 065 (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083 (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 (101. 6 mm) Maximum Degree