Shoe-In Spiked Shoes - X-Large Metal Bond Low VOC Construction – High

Low VOC Construction – High solids content delivers excellent film build per coat with low VOC emissions — environmentally responsible

- Double-segment configuration for tool life and refinement — two diamond segments per shoe create more surface contact than a single segment

then into transitional and resin polishing pads

Always plan a follow-up metal-bond grinding pass (typically starting at 16 or 25 grit) to remove the PCD scratch pattern before progressing through the standard prep or polishing sequence

Unlike standard metal-bond grinding segments that wear diamond grit against the surface

Shoe-In Spiked Shoes - X-Large Metal Bond Low VOC Construction – HighHands Free Slip On Design No Straps or Buckles Slips over your existing shoes or boots in seconds with no straps, buckles, or adjustments required eliminates fumbling with cloth straps and metal hardware that drag, break, or come loose on the jobsite. 3 4" Sharp Spikes for Resinous Floor Coatings Equipped with 3 4" sharp replaceable spikes ideal for installing epoxy, polyaspartic, urethane, and other resinous floor coatings, as well as concrete