20x Std. Frame Assembly Cable 4.00OD This PVC plastic cap and

This PVC plastic cap and steel mounting connection hardware is designed to provide and aesthetic finish to the bottom of the Festival Mast assembly and lock the mast in position to keep it from inadvertently jumping off the cross cables during high winds

Color: "Old Glory Red"

The cable is precision fabricated from 1/4" galvanized steel aircraft cable and swaged around an end thimble on each end

The top section of the pole measuring 5'0" is fitted with a zinc plated steel top pin and countersunk hole for a bolted connection to the bottom section

Each length of tubing is drilled with parallel 5/16" diameter through holes located 3" from each end of the extrusion

20x Std. Frame Assembly Cable 4.00OD This PVC plastic cap andThis cable is used on 20' wide traditional frame tents to keep the eave framing from bulging outward from the weight of the upper rafter framework. The cable is precision fabricated from 1 4" galvanized steel aircraft cable and swaged around a large loop. The loop is designed to connect over the eave arm of a Side Tee or Special Side Tee fitting during the assembly process. **This is a single cable assembly.**