Silicone Hose, 1 3/8 x 1" 45 deg. Reducing Elbow Inch_3 These anodized aluminum joiner nipples

These anodized aluminum joiner nipples are designed for splicing together our 57mm (2 1/4") ID silicone coolant and turbo intake hose

5 Inch 4 Inch 4

Exceeding the temperature rating of 356°F will destroy it

Four layers of polyester reinforcement and 3 reinforcing rings allow operating pressures of 28 psi (113 psi burst pressure) and temperatures up to 350° F (180° C)

Ordering Qty 1 will get you one cap

Silicone Hose, 1 3/8 x 1" 45 deg. Reducing Elbow Inch_3 These anodized aluminum joiner nipplesOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These 45 degree reducer elbow hoses have a 35mm ID at one end