Silicone Hose, 2.00" I.D. 180 degree Elbow, 4" Legs E180.57-BLACK The 4-ply reinforcement results in

The 4-ply reinforcement results in a 5mm wall thickness (80mm / 3 1/8" and 61mm / 2 3/8" OD) and a working pressure rating over 22 psi (110 psi burst pressure)

The 5mm wall thickness results in a 4 1/8" (105mm) OD

Use with our Aluminum Splicing Nipples (HJ51 and HJ38) and Lined Hose Clamps (Part No

These 90 degree elbows have a 1 1/2" ID with a smooth

5mm wall thickness (113mm / 4 7/16" and 100mm / 3 15/16" OD) and a working pressure rating over 8 psi (42 psi burst pressure)

Silicone Hose, 2.00" I.D. 180 degree Elbow, 4" Legs E180.57-BLACK The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 2" ID with a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the