Fixed Mounting Flat Base for Electric Linear Actuator A (Model 0043070) CB Remotes 1000M/3000Ft 1) If you want to

1) If you want to control the AC 110V or 220V equipment

(disconnect G and K

1) Must turn 7-gang and 8-gang to OFF position after deleting the transmitters

The terminal <OUT2> of the receiver stops outputting

the transmitter sends a wireless signal "OFF"

Fixed Mounting Flat Base for Electric Linear Actuator A (Model 0043070) CB Remotes 1000M/3000Ft 1) If you want toFixed mounting flat base for electric linear actuator A Aluminum material. Can be used to replace the linear actuator A bottom mounting bracket. Can be used for vertical mounting linear actuators A Installation operation: 1. Use a hexagonal wrench to unscrew the three screws at the bottom of linear actuator A and remove the original bottom shell. 2. Install the flat base to the bottom of linear actuator A and tighten the three screws with a hexagonal