Silicone T-Hose, 32mm (1.25") ID w/25mm (1") ID Branch SHH32-RED and flexible to temperatures from

and flexible to temperatures from -60°C to +180°C (-76°F to +356°F)

The 4-ply reinforcement results in a working pressure rating in excess of 26 psi and a 5mm wall thickness (80mm / 3 1/8" OD)

5 Inch 3 Inch 4 Inch 5 Inch Pressure 24 psi 20 psi 19 psi 16 psi 14 psi Vacuum 20 in Hg 18 in Hg 16 in Hg 13 in Hg 10 in Hg * For straight lengths of hose at 72° F

These hump connector hoses have a 60mm ID to provide a flexible coupling between two 2 3/8" OD tubes

"wipe down" finish that is easy to keep clean

Silicone T-Hose, 32mm (1.25") ID w/25mm (1") ID Branch SHH32-RED and flexible to temperatures fromOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is