Silicone Hose, 1 x 3/4 inch ID Straight Reducer Color:Red measure the outside diameter of

measure the outside diameter of your hose AFTER it is installed on the tubing

This size can conform to gentle bends with a 3

The 4-ply reinforcement results in a 5mm wall thickness (112mm / 4 7/16" and 73mm / 2 7/8" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

The 4-ply reinforcement results in a 5mm wall thickness (73mm / 2 7/8" and 67mm / 2 5/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

The 3-ply reinforcement results in a 4mm wall thickness (30mm / 1 3/16" and 27mm / 1 1/8" OD) and a working pressure rating over 60 psi (300 psi burst pressure)

Silicone Hose, 1 x 3/4 inch ID Straight Reducer Color:Red measure the outside diameter ofOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These straight reducer hoses are approximately 5 inches long