ORIFICE FOR FOAMJET 1.1MM 10.5000 Since a pump only uses

Since a pump only uses a small amount of water per minute compared to the volume that a standard city line can produce

The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber

This is very bad for your pump

1x 3/8" Stainless Steel Plug Inlet (pre-installed)

When attempting to determine the correct orifice size use a nozzle selection chart with your machine specification of GPM and PSI

ORIFICE FOR FOAMJET 1.1MM 10.5000 Since a pump only usesDescription MTM Hydro Foam Cannon orifices are meant to allow foam cannons to be used on a variety of machines with varying PSI and GPM. These orifices (aka nozzles) will more accurately accommodate a machine requiring a larger or smaller orifice which is estimated in the ranges of flow exceeding 4 gallons per minute or below 2 gallons per minute. The purpose is not to increase or decrease pressure but rather to match as closely as possible, to the