Fuel Hose, 2 1/4" to 1 1/2" I.D. Straight Reducer SR76.57-BLUE Straight reducer hose is pre-cut

Straight reducer hose is pre-cut to approximately 4" long

The 16mm ID at one end and 13mm ID at the other end let you connect a 5/8" OD tube to a 1/2" OD tube

5mm wall thickness (125mm / 5" and 100mm / 3 15/16" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

75 and 3613-3

These 45 degree reducer elbow hoses have a 102mm ID at one end and an 89mm ID at the other end to connect a 4" OD tube to a 3 1/2" OD tube

Fuel Hose, 2 1/4" to 1 1/2" I.D. Straight Reducer SR76.57-BLUE Straight reducer hose is pre-cutThis reducer hose combines the tough flexibility and good looks of our black silicone coolant hoses with a fuel and oil resistant fluorocarbon rubber (FKM) inner liner. It is ideal for use as a fuel filler hose (connecting your fender filler to your fuel tank or fuel cell) or other low pressure fluid transfer applications. One end of this reducer has a 2. 25" (57mm) ID; the other end has a 1. 5" (38mm) ID to connect two tubes of different sizes.