Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE The 3-ply reinforcement results in

The 3-ply reinforcement results in a working pressure rating in excess of 40 psi (178 psi burst pressure) and a 4

The 3-ply reinforcement results in a 4mm wall thickness (36mm / 1 3/8" and 30mm / 1 3/16" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

Use with our Aluminum Splicing Nipples (HJ70 and HJ63) and Lined Hose Clamps (Part No

On top of all that

5mm wall thickness (113mm / 4 7/16" and 100mm / 3 15/16" OD) and a working pressure rating over 8 psi (42 psi burst pressure)

Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE The 3-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is