Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black Slide the large end of

Slide the large end of the reducing elbow over the nipple on the coolant reservoir

The 5mm wall thickness results in a 6 3/8" (162mm) OD

The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (61mm / 2 3/8" OD)

5mm wall thickness (100mm / 3 15/16" and 74mm / 2 15/16" OD) and a working pressure rating over 12 psi (64 psi burst pressure)

Temperature rating: 300°F continuous

Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black Slide the large end ofOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is